Cold fiber micro powder machine is Huayu Wantong The newly developed whole grain low-temperature milling equipment can adjust the milling fineness from 80 meshes to 2000 meshes at will. The ice cold fiber micronizer adopts the automatic circulation of ice water, which can ensure that the powder microelements are not lost, the materials are not hot, unchangeable, the output is large, the loss is low, and the operation is easy. It is suitable for the processing of nutritious coarse grains and other materials that cannot be crushed at normal temperature, such as beans, corn Grinding and milling of naked oats, buckwheat, Chinese medicinal materials, chemical raw materials, etc.
The mill is composed of ice water air compressor, homogenizer, alloy turntable, double-layer grinding chamber, powder impeller, intelligent powder humidifier, intelligent automatic oiler, bearing room, fan, pulse, Shakelon, air shutoff, integrated electric control system, etc.
Performance characteristics
1. When making 100 mesh fine flour, the power consumption per ton of material is only 55 degrees, lower than the power consumption per ton of traditional mills, so as to achieve grain saving, cost reduction and efficiency increase.
2. The flour can not be heated and the nutrition will not be lost in the double-layer flour room. The 0-2 degree ice water circulation will keep the materials at normal temperature. The flour can not be heated and the nutrition will not be lost.
3. Simple operation The fineness of the powder can be adjusted from 80 meshes to 2000 meshes within 5 seconds. It is a fool type operation, with low failure, no need for professional pulverizers to operate, small land occupation and low investment.
4. The main and auxiliary motors of intelligent spray humidifier, frequency conversion speed regulation, and intelligent ultrasonic spray humidifier can conduct uniform humidification of powder in a larger space.
5. Composition The mill is composed of ice water air compressor, homogenizer, alloy turntable, double-layer grinding chamber, powder impeller, intelligent powder humidifier, intelligent automatic fuel dispenser, bearing chamber, fan, pulse, Shakelon, air shutoff, integrated electric control system, etc.
6. It is widely applicable to the processing of nutritious coarse cereals and other materials that cannot be crushed under normal temperature, such as beans, corn, naked oats, buckwheat, Chinese medicinal materials, chemical raw materials, etc.
working principle
After the materials enter the shaping area, under the action of high-speed impact hammer and toothed plate, violent collision, friction and shearing will occur to form particle crushing. The crushed materials will enter the grading area, and the materials in the grading area will be sorted out in time to enter the lower level product collection under the action of the grader, The materials that cannot reach the fineness continue to be crushed in the crushing area. The products with different fineness requirements are produced by adjusting the speed of the grading turbine. The speed regulation is completed by adjusting the frequency converter of the electrical cabinet, which is convenient and reliable. The crushing fineness is adjustable. As the materials enter the crushing chamber with the wind, the crushing temperature can be reduced after they are qualified and discharged out of the machine with the gas. The crushing host is controlled by a frequency converter, which reduces the impact of high-power motors on the factory grid.
