Corn deep processing machinery Do a good job of maintenance to reduce the failure rate. When it comes to the deep processing of corn, the corn deep processing machinery is a mechanical equipment that has to be mentioned. It can process corn into a variety of edible forms, providing us with more convenience. But there are also failures. In order to reduce the occurrence of failures, the manufacturer recommends that everyone should strengthen the maintenance of corn deep processing machinery,
1、 Common faults
1. Screw agitator fault: there are two problems causing screw agitator fault: the agitator shaft does not rotate and the grain outlet does not discharge grain. The reason is that the feeding is too much, the transmission belt slips, the motor rotates incorrectly, the outlet is blocked, and the agitator blades are cracked.
2. Motor problems: There are about ten or more units of corn deep processing machinery in different sizes. Therefore, the problems related to the motor cannot be ignored. High temperature is one of the main reasons for motor damage. Bearing oil shortage, bearing dirt, bearing damage or motor overload can all lead to high motor temperature.
3. Fault of air shutter: Generally, the fault of air shutter is that the air shutter is poor and the face bag can be sucked. Air leakage at all joints, abrasion of impeller, etc. will lead to problems of air shutter.
2、 Maintenance Skills
1. After we use the corn deep processing machine, we need to check it to see if the protective device is normal and the line is complete, and put it in the designated position after sorting.
2. Clean up some debris in corn deep processing machinery processing, check some internal parts to see if there is water leakage, oil leakage, etc.
3. The equipment shall be filled and replaced in time, and the lubricating oil shall be checked for compliance with the regulations, and the oil line shall be cleaned.
4. It is necessary to consider the safety protection measures of corn deep processing machinery and implement the equipment maintenance system. If you find some minor problems in the operation of the machine, you must not make do with it. Forced use can only avoid unnecessary economic maintenance costs.
5. It is required to operate in strict accordance with the instructions to prevent mechanical damage caused by operation.
6. Users have a detailed understanding of various parameters and performance of corn deep processing machinery before use, so as to better operate and use the machinery.
The corn deep processing machinery should be well maintained to reduce the failure rate. If you want to know more details about equipment configuration and site visit, you are welcome to visit the factory at any time. Address: North Area of Industrial Cluster, Lushan County, Henan Province. The manufacturer arranges a special car for reception, accompanied by a specially assigned person, so that you can enjoy excellent treatment Huayu Wantong The whole set of equipment can be purchased in a one-stop manner, and problems in the later period can be solved in time for you. The after-sales service is guaranteed throughout the whole process. website: //molecule-labs.com/
