new type Corn huller Correct solutions shall be carried out for different fault types. When solving the small fault of corn peeling machine, we should first understand the cause of the fault, and correctly solve the fault cause of the equipment!
1. There are two kinds of faults of the screw agitator during the use of the corn peeling machine. One is that the agitator shaft does not rotate, which may be caused by excessive feeding or slipping of the drive belt. Second, the grain outlet does not discharge grain, which may be caused by the wrong rotation of the motor, blockage of the outlet or cracking of the agitator blade.
2. The air lock of the corn peeling machine will malfunction, which may be due to the poor air lock, resulting in the flour bag being sucked in. Corn processing machinery The most common reasons in application are air leakage at the joints, impeller wear, etc. If the impeller is worn, we can add a rubber plate at the outer edge.
3. In case of motor failure, there are more than 10 motors of different sizes in the whole corn peeling machine. Therefore, the motor failure cannot be ignored. High temperature is one of the main reasons for motor damage. The causes of high temperature include bearing oil shortage, bearing dirt, bearing damage or motor overload.
The new corn peeling machine should solve the problems correctly according to different fault types. If you want to know more about equipment configuration, on-site commissioning and other details, you are welcome to visit the factory at any time. Address: the intersection of Xinggong Road and Zhongxin Road in the north area of Lushan Industrial Cluster, Lushan County, Henan Province. The manufacturer arranges a special car to pick up and send off, accompanied by a specially assigned person. //molecule-labs.com/
