To prevent Corn deep processing equipment Correct power on/off operation is required in case of problems during processing. If corn food is processed by corn deep processing equipment, the startup procedure should be standardized during startup. If the startup operation is improper, various failures in the food processing process will occur, which will affect the normal use of the complete set of corn deep processing equipment. In order to prevent problems in the food processing process, We need to start the machine correctly.
1. After opening the corn deep processing equipment, shift the engine gear from the first gear to the third gear and then to the reverse gear. Investigate the operation of the equipment, debug the left and right turning mechanisms, investigate the operation of the equipment, check the sensitivity of the clutch and brake. If the clutch is completely depressed, the complete separation can be completed, and the data displayed on the dashboard is normal, If any problem is found, it shall be stopped for maintenance immediately.
2. For the engine test of the corn deep processing equipment, listen carefully to the sound of the engine during the operation of the equipment. If you hear abnormal noise, you should stop the machine in time to check. During the operation of the equipment, investigate the oil pressure gauge and temperature gauge of the equipment to ensure that the water temperature of the equipment is within the specified range.
3. During the test, check whether the fasteners of the corn deep processing equipment are closely connected, whether the temperature of the bearing and bearing bush parts is normal during the processing, and whether the belt and chain parts of the equipment are severely worn. Drain the lubricating oil and hydraulic oil in the transmission hydraulic box, and clean the filter components to ensure that all components are in good working condition. After the test is completed, do not rush to test the higher horsepower directly, but gradually increase the horsepower for the test to ensure that all parts of the equipment have a full running in process. Before operating the corn deep processing equipment, make preparations and check to ensure that the import and export knives are adjusted in place, so as to ensure that the milled rice is not only white, but also fine, without broken rice. In order to ensure the processing quality of raw grains, attention should be paid to the adjustment of the rice cutter to ensure that the gap between the rice cutter and the roller bar is within the normal working range, so as to avoid affecting the rice milling quality due to excessive gap.
In order to prevent problems in the processing of corn deep processing equipment, it is necessary to turn on and off the machine correctly. If you want to know more about equipment configuration, on-site commissioning and other details, you are welcome to visit the factory at any time. Address: the intersection of Xinggong Road and Zhongxin Road in the north area of Lushan Industrial Cluster, Lushan County, Henan Province. The manufacturer arranges a special car to pick up and send off, accompanied by a specially assigned person. //molecule-labs.com/
