Corn processing equipment What matters should be paid attention to when using primary cleaning? When using corn processing equipment to process corn raw materials, preliminary cleaning and screening is an indispensable tool. Initial cleaning refers to the preliminary cleaning of corn raw materials. The objects of preliminary cleaning and screening are oversized impurities such as soil and stone, rope belt and straw. Its working position is often placed at the front end of the cleaning process to protect the safety of subsequent corn processing equipment. In the actual production process, the following three operating precautions should be paid attention to when using the primary cleaning screen:
1. Equipment protection: if the corn outlet or the miscellaneous outlet of the preliminary screening is blocked, the materials blocked in the machine will jam the screen drum, which may cause damage to the transmission mechanism or motor. When operating such equipment, certain attention should be paid, and necessary protection should be set in the control electrical circuit. The content of various impurities in raw materials processed by the preliminary cleaning equipment is high, resulting in more dust. Therefore, the suction and dust removal of the preliminary cleaning equipment must be effective to protect the environment.
2. Evaluation of process effect: the removal rate of oversize impurities is more than 90%, and there should be no normal and complete corn grains in the lower foot. Because the working flow of the preliminary cleaning equipment is large and generally unstable, there is no requirement for the efficiency of small impurities removal of the preliminary cleaning equipment. If the vibrating screen and the plane rotary screen are used for preliminary cleaning, some small impurities can be removed, but this cannot replace the screening equipment in the wool cleaning.
3. Flow control: The flow in the preliminary cleaning process of corn processing equipment is generally large and unstable. If the flow is too large, it may lead to the discharge of materials from the large miscellaneous outlet, and may also lead to equipment blockage. Therefore, excessive flow must be prevented during the feeding process.
What matters should be paid attention to when using corn processing equipment for preliminary screening? If you want to know more about equipment configuration, on-site commissioning and other details, you are welcome to visit the factory at any time. Address: the intersection of Xinggong Road and Zhongxin Road in the north area of Lushan Industrial Cluster, Lushan County, Henan Province. The manufacturer arranges a special car to pick up and send off, accompanied by a specially assigned person. //molecule-labs.com/
